China HDPE PE100 umbhobho grade mveliso kunye nababoneleli |Junhai

HDPE PE100 ibakala lombhobho

HDPE PE100 ibakala umbhobho Featured Umfanekiso

inkcazelo emfutshane:

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iinkcukacha zemveliso

I-polyethylene ephezulu (i-HDPE) i-100S yinto efanelekileyo kwipayipi ye-PE100 kuba kungekhona nje ukuzinza kwayo kodwa kunye nexabiso layo lezoqoqosho kufuneka liqwalaselwe xa ukhetha ukubeka umbhobho.

Kutheni ukhetha ibakala lombhobho we-HDPE 100S?

I-1.Ukususela ekusebenzeni kothelekiso, ukudibanisa kukhuselekile kakhulu, kuba ngokusisiseko kuya kuthatha indlela yokuncibilika okutshisayo, ngoko kuya kuba nengxaki encinci yokuvuza kwamanzi.

2. Ngaphezu koko, ukumelana nobushushu obuphantsi kunye nokumelana nokushisa okuphezulu kwesi sixhobo nazo zifanelekile, ezinokuthi zisetyenziswe ngaphakathi koluhlu lwe-minus 60 degrees ukuya kuma-60 degrees.Kwaye imichiza engcwatywe emhlabeni, emhlabeni, ayiwuchaphazeli.Kwaye ngenxa ye-insulator, ngoko akukho lula ukwenzeka iingxaki zokubola kwe-electrochemical.

3. Olu hlobo lokumelana nokuguga kombhobho lukwalungile, ubomi benkonzo bunokufikelela kwiminyaka engaphezu kwama-50.Nokuba imekobume erhabaxa, umoya, imvula nelanga, aziyi konakala.Xa ukwakhiwa, kukhanya ngakumbi kunombhobho we-galvanized, ngoko kulula ukuphatha kwaye kulula kakhulu ukuyifaka.Iindleko zokufakela ziyancipha kakhulu, kwaye ukufakela kungathathwa ngeendlela ezahlukeneyo, ezifana nokubhobhoza okanye i-welding, i-hot melt.

Inkcazo

Ikhowudi yomvelisi	HDPE 100S
Iipropati	Imida	Iziphumo
Ubuninzi,g/cm3	0.947~0.951	0.950
Umlinganiselo wokunyibilika kokunyibilika(190°C/5.00kg) g/10 imiz	0.20~0,26	0.23
Uxinzelelo lwesivuno se-tensile,Mpa ≥	20.0	23.3
Uxinzelelo loxinzelelo ngekhefu,% ≥	500	731
I-Charpy Notched Impact Amandla (23℃), KJ/㎡ ≥	23	31
Ixesha lokungeniswa kwe-oxidation (210℃,Al),umzuzu ≥	40	65
into eguquguqukayo,mg/kg ≤	300	208